Homepage | Set Home | Add to Favorites

Wuxi Ange Environmental Technology Co.,Ltd

  • No Category

Friends links

3E&3M PP Melt Blown Filter Cartridge Machine
Click image to view full size image
Product: Views:2123E&3M PP Melt Blown Filter Cartridge Machine 
Unit price: Negotiable
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2018-11-06 14:13

Product Description

ANGE 3E&3M PP melt blown filter cartridge machine is a machine that used to produce pp filter cartridges which are widely used both in household water purifier and industrial wastewater pretreatment. And the working principle of this machine is as below:

There are two kinds of full automatic PP melt blown filter cartridge machines, one is adopting roots blower as the pressure –driven system; the other is using air compressor with air tank. Whatever both principle is similar as below:

Auto Feeder feeds 100% new drawing class polypropylene into Extruder. Then pp materials are melt by heating through Extruder. Roots Blower or Air Compressor and Air Tank blows the air into Air Heater and then the heated air will blow the liquid melted polypropylene materials through the Nozzle Heads (with hundreds of small holes in the mold), and finally threaded materials arrive at the spindle of Winding Device. Winding Device rotates and forms filter cartridges. Then formed pp melt blown filter get off the spindle and reach to Auto Cutter. Auto Cutter cuts them according to the required length upon customers’ requirement.

Technical Parameters





Filter Cartridge Size:

10'', 20'', 30'', 40'', etc.

Filter Cartridge Filtration Accuracy:

0~100 microns

Filter Cartridge Inner Diameter:

As customer requirements (one receiving car with only one size of receiving screw)

Filter Cartridge Outer Diameter:


Filter Cartridge Length:

5 inches to 50 inches (we can also make if other lengths are needed)

Production Capacity:

5000-6000pcs/24 hours (filter cartridge size is 10 inches, inner diameter 28mm, outer diameter 60mm, weight 100g)

Product Features

*Using fully automatic control system, it can continuously produce various specifications of filter cartridges.

* Easy to operate, high output, high efficiency, long machine life.

* Adopt frequency conversion speed control system, low power consumption, low loss, good product quality, stable performance and high filtration precision.

* Realize the radial multi-layer structure of the filter element to achieve the layered filtering effect of the filter element.

Parts Can Be Customized

Nozzle Size

1. Length: 300 ~ 700mm

2. Hole diameter: The default is between 0.35~0.4mm (the hole diameter is less than 0.3, we can also customize, but the price is more expensive)


1. Built-in (embedded under the extruder)

2. External (single oven)

Loading Machine

1. With dryer

2. Without dryer

Roots Blower / Air Compressor (Gas Tank)

Can be purchased by yourself

Winding Machine and Cutting Machine

1. Separate

2. Conjoined

The internal thread of the filter cartridge

1. Threaded

2. No thread